Rayman 2

Shrooblord · Post by **Shrooblord** » Tue Dec 11, 2012 11:47 pm

Wasn't Droolie at some point very near cracking it? He had the Sanctuary of Water and Ice loaded up with all its models, except they had been translated to the (0,0,0) world coordinates, making everything a big mess. But it was a huge step! For the first time we could see the geometry of a level from a bird's eye view and I was getting all excited over the possibility of him breaking that puzzle's hard-coded seal soon thereafter. But I guess it was too much of a challenge... or perhaps he has a life. xP

Adsolution · Post by **Adsolution** » Tue Dec 11, 2012 11:49 pm

If that were the case, he would still have to find a way to get the modified worlds back into the game, which is a lot harder than just extracting it.

Hey, this gives me a great idea, how about a 3D Rayman Designer-like mode for ROTD?

Level editors are boss.

Shrooblord · Post by **Shrooblord** » Tue Dec 11, 2012 11:51 pm

Adsolution wrote:Hey, this gives me a great idea, how about a 3D Rayman Designer-like mode for ROTD?

Level editors are boss.

Weren't you already thinking about doing this? :O
This is one of the first things I thought my game should have, since I do love games with editors OH so much. Then again, building a full editor from scratch is a pretty hard thing to do, so I wish you good luck. Perhaps you should make a sort of plugin for CE3 to be able to handle your specific files easily instead.

Keane · Post by **Keane** » Tue Dec 11, 2012 11:55 pm

Coming back to Revolution - I have never encountered any glitches, or at least anything that has any effect upon the game.

Master · Post by **Master** » Tue Dec 11, 2012 11:56 pm

Adsolution wrote:If that were the case, he would still have to find a way to get the modified worlds back into the game, which is a lot harder than just extracting it.

Hey, this gives me a great idea, how about a 3D Rayman Designer-like mode for ROTD?

Level editors are boss.

Brilliant idea, though doesn't CryEngine have level editing tools anyway?

Adsolution · Post by **Adsolution** » Wed Dec 12, 2012 12:22 am

@Master, @Shroob -> viewtopic.php?p=735805#p735805

LKPettin2 · Post by **LKPettin2** » Sat Dec 15, 2012 6:39 pm

That glitch happened to me a moment ago:
http://www.youtube.com/watch?v=RzWherCcRM0

Master · Post by **Master** » Sat Dec 15, 2012 6:57 pm

Never seen that one before...

Haruka · Post by **Haruka** » Sat Dec 15, 2012 7:03 pm

LKPettin2 wrote:That glitch happened to me a moment ago:
http://www.youtube.com/watch?v=RzWherCcRM0

That happened to me in PC the last time I played it, but sadly I wasn't in time to pick on FRAPS and uploading this.

I admit its creepy. 8'3

Danone · Post by **Danone** » Sat Dec 15, 2012 9:22 pm

I can see Rayman is very happy.

Yeah, that glitch happened to me.

Droolie · Post by **Droolie** » Sat Dec 15, 2012 9:43 pm

Shrooblord wrote:Wasn't Droolie at some point very near cracking it? He had the Sanctuary of Water and Ice loaded up with all its models, except they had been translated to the (0,0,0) world coordinates, making everything a big mess. But it was a huge step! For the first time we could see the geometry of a level from a bird's eye view and I was getting all excited over the possibility of him breaking that puzzle's hard-coded seal soon thereafter. But I guess it was too much of a challenge... or perhaps he has a life. xP

Both actually.

The thing is that Rayman Revolution uses a really strange format that first loads everything, without any coordinates (resulting in the (0,0,0) coordinates I got). Using the information in a second file, it later puts everything where it belongs. I don't completely understand the first file, but I managed to understand it enough to get what I got. The second file is their own format, I think, and it's a huge mess.
So yeah, it's a challenge, but also one that's just not really worth solving.

Danone · Post by **Danone** » Sat Dec 15, 2012 9:44 pm

How are you doing, Droolie? you're not active like before.

Adsolution · Post by **Adsolution** » Sat Dec 15, 2012 10:12 pm

Drolpiraat wrote:The thing is that Rayman Revolution uses a really strange format that first loads everything, without any coordinates (resulting in the (0,0,0) coordinates I got). Using the information in a second file, it later puts everything where it belongs. I don't completely understand the first file, but I managed to understand it enough to get what I got. The second file is their own format, I think, and it's a huge mess.
So yeah, it's a challenge, but also one that's just not really worth solving.

That's an interesting method, could that possibly explain why 3D Ripper DX shoves everything nearly into a single plane when you capture Revolution's frames? I'm not sure if that's related at all.

By the way. on the note of 3D Ripper DX + Revolution, I found that it isn't quite perfect plane, but they're spaced apart by the smallest possible increment that the 3DR format could hold. I spent about ten minutes stretching it out and eventually I got a really malformed 'level;' some of the terrain was in the right places, but some facets were scattered about almost randomly. I got a really mangled minisaurus too.

Droolie · Post by **Droolie** » Sun Dec 16, 2012 1:15 am

Danone wrote:How are you doing, Droolie? you're not active like before.

I'm doing just fine, thanks. Just have a lot of work for uni, that's all. ^^

Adsolution wrote:That's an interesting method, could that possibly explain why 3D Ripper DX shoves everything nearly into a single plane when you capture Revolution's frames? I'm not sure if that's related at all.

By the way. on the note of 3D Ripper DX + Revolution, I found that it isn't quite perfect plane, but they're spaced apart by the smallest possible increment that the 3DR format could hold. I spent about ten minutes stretching it out and eventually I got a really malformed 'level;' some of the terrain was in the right places, but some facets were scattered about almost randomly. I got a really mangled minisaurus too.

It's possible that it's because of Rayman Revolution's bad usage of Renderware (which already was an outdated engine), but I think that what you're saying is more related to the way the graphics plugin works. Does it happen with other PS2 games and/or have you tried using another graphics plugin?

LKPettin2 · Post by **LKPettin2** » Tue Dec 18, 2012 5:13 pm

Another glitch. This time on Crow's Nest. Exactly, camera glitch.
If you want to see it/try to perform, I've uploaded it on YT:
http://www.youtube.com/watch?v=6gEXyqhJ ... e=youtu.be

Shrooblord · Post by **Shrooblord** » Tue Dec 18, 2012 5:29 pm

How in Polokus's name did you manage to have only your starting amount of Energy at the final bossfight?

LKPettin2 · Post by **LKPettin2** » Tue Dec 18, 2012 5:33 pm

Cheats. Cheats. Gothere.
I have got one profile for testing glitches. It's cause of it.

GOT4N · Post by **GOT4N** » Fri Dec 21, 2012 10:52 am

I search a good taser for TAS GBC version with me: )?

Master · Post by **Master** » Fri Dec 21, 2012 11:51 am

...What?
TAS? As in Tool Assisted Speedrun? On the GBC version of Rayman 2?
Seems interesting, but speedrunning isn't my forte, but I'm sure others may be capable.

GOT4N · Post by **GOT4N** » Fri Dec 21, 2012 12:04 pm

Master4lyf1 wrote:...What?
TAS? As in Tool Assisted Speedrun? On the GBC version of Rayman 2?
Seems interesting, but speedrunning isn't my forte, but I'm sure others may be capable.

Ok i'm at Whale Bay by 6 minutes atm, with 3600 rerecords

Rayman Pirate-Community

Rayman 2

Which version is your favourite?

Re: Rayman 2

Re: Rayman 2

Re: Rayman 2

Re: Rayman 2

Re: Rayman 2

Re: Rayman 2

Re: Rayman 2

Re: Rayman 2

Re: Rayman 2

Re: Rayman 2

Re: Rayman 2

Re: Rayman 2

Re: Rayman 2

Re: Rayman 2

Re: Rayman 2

Re: Rayman 2

Re: Rayman 2

Re: Rayman 2

Re: Rayman 2

Re: Rayman 2