For everything not related to either Rayman or Pirate-Community.
Fifo
Posts: 10785 Joined: Thu Sep 19, 2013 7:08 pm
Location: rm –rf /*
Contact:
Tings: 104570
Post
by Fifo » Thu Apr 20, 2017 3:27 pm
Hoodcom wrote: Fifo wrote: However < doesn’t know which potentiometer is for 33⅓ and which one for 45 RPM.
The one on <'s turntable is the adjustable wheel near the window you can view the lines on for speed.
Cool. <’s turntable has two pots on the bottom near the motor.
Hoodcom wrote: […] view the lines on for speed.
< says those are called “strobe marks”.
Hunchman801
Posts: 87722 Joined: Thu Aug 07, 2003 6:50 pm
Location: Paris, France
Contact:
Tings: 640722
Post
by Hunchman801 » Thu Apr 20, 2017 3:34 pm
Pirez wrote: < can still abs and pullups, brah. < can now routinely do series of 80 situps and 8 pullups. Doest thou even lift thouself, Lord Hunch?
< says yes, but only with an added 20 kg.
Reese Riverson
Posts: 40260 Joined: Wed Sep 03, 2003 5:32 pm
Location: R̸̨̧̛̝͎͔̹͉̫̞͚͎͈̫̲̘͕̞͔̼̣͍̞̤̹̫̘̼͚̤̮̟͍̺̯͍̜̹͓̤͖͎͌̀̿͗̍͌̈́̿̿͑̄̀͌̒̅͛̄̾̈͠ͅayman Pirate-Community Lodge
Contact:
Tings: 533947
Post
by Reese Riverson » Thu Apr 20, 2017 3:54 pm
Fifo wrote: Cool. <’s turntable has two pots on the bottom near the motor.
< says those are called “strobe marks”.
Hmm, < bets those need some deoxit used on them on yours too, and to be finely tuned. < will use deoxit on <'s turn table.
Ah, yeah. < forgot the term earlier.
Ray502
Posts: 12343 Joined: Tue May 29, 2012 8:15 pm
Location: Uh, well, I don't really know
Tings: 52095
Post
by Ray502 » Thu Apr 20, 2017 4:50 pm
<'s USB flash drive stick came in the mail today! Ready to add <'s tunes into <'s PS4.
Fifo
Posts: 10785 Joined: Thu Sep 19, 2013 7:08 pm
Location: rm –rf /*
Contact:
Tings: 104570
Post
by Fifo » Thu Apr 20, 2017 6:30 pm
Hoodcom wrote: Fifo wrote: Cool. <’s turntable has two pots on the bottom near the motor.
Hmm, < bets those need some deoxit used on them on yours too, and to be finely tuned. < will use deoxit on <'s turn table.
Yeah, < will need to adjust the motor speed – but how can < figure out which one’s for 33 and which one for 45? They’re not marked.
Also, < doesn’t have DeoxIT.
Reese Riverson
Posts: 40260 Joined: Wed Sep 03, 2003 5:32 pm
Location: R̸̨̧̛̝͎͔̹͉̫̞͚͎͈̫̲̘͕̞͔̼̣͍̞̤̹̫̘̼͚̤̮̟͍̺̯͍̜̹͓̤͖͎͌̀̿͗̍͌̈́̿̿͑̄̀͌̒̅͛̄̾̈͠ͅayman Pirate-Community Lodge
Contact:
Tings: 533947
Post
by Reese Riverson » Thu Apr 20, 2017 6:51 pm
Fifo wrote: Hoodcom wrote: Fifo wrote: Cool. <’s turntable has two pots on the bottom near the motor.
Hmm, < bets those need some deoxit used on them on yours too, and to be finely tuned. < will use deoxit on <'s turn table.
Yeah, < will need to adjust the motor speed – but how can < figure out which one’s for 33 and which one for 45? They’re not marked.
Also, < doesn’t have DeoxIT.
< asks what make and model ^'s turntable is.
< Also to answer Plum, that's generally not the ideal way to do it.
Fifo
Posts: 10785 Joined: Thu Sep 19, 2013 7:08 pm
Location: rm –rf /*
Contact:
Tings: 104570
Post
by Fifo » Thu Apr 20, 2017 7:19 pm
Hoodcom wrote: < asks what make and model ^'s turntable is.
It’s a linear tracking (!) Panasonic SL-N15 that I got for free.
< hopes that helps.
PluMGMK wrote: < wonders if you can't just try the two potentiometers?
As Hoodcom said, that’s not a good way for doing it. It might just screw up the speed more.
Ambidextroid
Posts: 12913 Joined: Tue Mar 19, 2013 1:04 am
Location: Jaffa Castle
Tings: 665
Post
by Ambidextroid » Thu Apr 20, 2017 7:34 pm
<'s sleeping pattern is really getting out of hand, < just woke up at 7 in the afternoon and is having dinner for breakfast
Serza5
Posts: 48387 Joined: Sat Jul 26, 2008 7:51 pm
Location: MOTHER FUCKING SCOTLAND OH YEAH BABY
Contact:
Tings: 490135
Post
by Serza5 » Thu Apr 20, 2017 7:45 pm
< is amazed you consider "7" to still be in the afternoon!
nr0r
Posts: 1395 Joined: Mon Sep 06, 2010 10:03 pm
Location: Florida
Contact:
Tings: 16858
Post
by nr0r » Thu Apr 20, 2017 7:53 pm
< has far too many things to draw and hasn't had enough time to even make a thumbnail sketch for any of them.
Ambidextroid
Posts: 12913 Joined: Tue Mar 19, 2013 1:04 am
Location: Jaffa Castle
Tings: 665
Post
by Ambidextroid » Thu Apr 20, 2017 7:54 pm
Serza5 wrote: < is amazed you consider "7" to still be in the afternoon!
< would consider any time after midday to before midnight the afternoon, unless <'s got it wrong this whole time. < would just think the evening overlaps with the afternoon, rather than replacing it...?
---
Actually < just looked it up and indeed < had it wrong all this time
Well, good evening everyone
incognito
Posts: 15619 Joined: Wed Oct 02, 2013 10:34 am
Tings: 0
Post
by incognito » Thu Apr 20, 2017 7:56 pm
Ambidextroid wrote: <'s sleeping pattern is really getting out of hand, < just woke up at 7 in the afternoon and is having dinner for breakfast
< remembers when < had such a schedule, it nearly drove < insane.
Waking up without knowing if your watch tells you a P.M or A.M time.
Serza5
Posts: 48387 Joined: Sat Jul 26, 2008 7:51 pm
Location: MOTHER FUCKING SCOTLAND OH YEAH BABY
Contact:
Tings: 490135
Post
by Serza5 » Thu Apr 20, 2017 8:16 pm
Ambidextroid wrote: Serza5 wrote: < is amazed you consider "7" to still be in the afternoon!
< would consider any time after midday to before midnight the afternoon, unless <'s got it wrong this whole time. < would just think the evening overlaps with the afternoon, rather than replacing it...?
---
Actually < just looked it up and indeed < had it wrong all this time
Well, good evening everyone
Eh ^'s explanation sounds reasonable to < regardless
< usually just goes with "Any time after dinner is called evening"
Fifo
Posts: 10785 Joined: Thu Sep 19, 2013 7:08 pm
Location: rm –rf /*
Contact:
Tings: 104570
Post
by Fifo » Thu Apr 20, 2017 9:58 pm
PluMGMK wrote: < wonders how Fifo would feel about taking the turntable apart…
< doesn’t need to take it apart, there are two holes on the bottom that you can stick a screwdriver into and turn
PluMGMK
Posts: 40536 Joined: Fri Jul 31, 2009 9:00 pm
Location: https://www.youtube.com/watch?v=cErgMJSgpv0
Contact:
Tings: 136746
Post
by PluMGMK » Thu Apr 20, 2017 10:07 pm
If you could take it apart though, you might find labels near the potentiometers. Or maybe use a multimeter to see what resistances they're currently set to…
< is throwing out stupid suggestions.
Ray502
Posts: 12343 Joined: Tue May 29, 2012 8:15 pm
Location: Uh, well, I don't really know
Tings: 52095
Post
by Ray502 » Thu Apr 20, 2017 11:11 pm
< earned two dollars for sweeping and washing the dishes at <'s sister's house. Two less now to get for < to go to paradise.
Reese Riverson
Posts: 40260 Joined: Wed Sep 03, 2003 5:32 pm
Location: R̸̨̧̛̝͎͔̹͉̫̞͚͎͈̫̲̘͕̞͔̼̣͍̞̤̹̫̘̼͚̤̮̟͍̺̯͍̜̹͓̤͖͎͌̀̿͗̍͌̈́̿̿͑̄̀͌̒̅͛̄̾̈͠ͅayman Pirate-Community Lodge
Contact:
Tings: 533947
Post
by Reese Riverson » Thu Apr 20, 2017 11:13 pm
< has a guide handy for what < needs to do for <'s turntable, though < will need to get some lubricant handy too.
Fifo
Posts: 10785 Joined: Thu Sep 19, 2013 7:08 pm
Location: rm –rf /*
Contact:
Tings: 104570
Post
by Fifo » Fri Apr 21, 2017 5:10 am
PluMGMK wrote: If you could take it apart though, you might find labels near the potentiometers.
Yeah, < knows
PluMGMK wrote: Or maybe use a multimeter to see what resistances they're currently set to…
< doesn’t have a multimeter.