SOTM#170 - Rayman Legends
Forum rules
Please keep the forum rules and guidelines in mind when creating or replying to a topic.
Please keep the forum rules and guidelines in mind when creating or replying to a topic.
-
Ambidextroid

- Posts: 12913
- Joined: Tue Mar 19, 2013 1:04 am
- Location: Jaffa Castle
- Tings: 665
Re: SOTM #92 - Geometry/Shapes
I vote Serza and Hoodcom!
-
PluMGMK

- Posts: 40508
- Joined: Fri Jul 31, 2009 9:00 pm
- Location: https://www.youtube.com/watch?v=cErgMJSgpv0
- Contact:
- Tings: 136606
Re: SOTM #92 - Geometry/Shapes
I vote Harpic, Master and Serza5 w/ Hoodcom.
-
Serza5

- Posts: 48387
- Joined: Sat Jul 26, 2008 7:51 pm
- Location: MOTHER FUCKING SCOTLAND OH YEAH BABY
- Contact:
- Tings: 490135
Re: SOTM #92 - Geometry/Shapes
Serza5 wrote: 7 sigs means 3 votes maximum and no minumum.Because the votes started slightly later i'll add one day so the last day of votes will be the 28th and the results will be on the 29th.Code: Select all
Harpic fraîcheur : || Ambidextroid : | Master : | CHRdutch : 0 PluMGMK : | Serza5 w/ Hoodcom : || Hoodcom w/ Serza5 : |
I'm assuming this vote means for both sigs and not just one.Ambidextroid wrote:I vote Serza and Hoodcom!
-
Reese Riverson

- Posts: 40211
- Joined: Wed Sep 03, 2003 5:32 pm
- Location: R̸̨̧̛̝͎͔̹͉̫̞͚͎͈̫̲̘͕̞͔̼̣͍̞̤̹̫̘̼͚̤̮̟͍̺̯͍̜̹͓̤͖͎͌̀̿͗̍͌̈́̿̿͑̄̀͌̒̅͛̄̾̈͠ͅayman Pirate-Community Lodge
- Contact:
- Tings: 533702
Re: SOTM #92 - Geometry/Shapes
I will vote for Ambi's and Master's please. 
-
Dart

- Posts: 4950
- Joined: Tue Aug 21, 2012 3:04 pm
- Location: The Realm Of Perpetual Sleepiness
- Tings: 49845
Re: SOTM #92 - Geometry/Shapes
I'm going with Serza and Hoodcom
-
Master

- Posts: 53542
- Joined: Sun Aug 21, 2011 10:14 am
- Location: Somewhere specific, I'd assume.
- Tings: 468310
Re: SOTM #92 - Geometry/Shapes
Very nicely done ones here. Tough decision indeed...
Serza5 w/ Hoodcom, Ambi and CHRdutch.
Serza5 w/ Hoodcom, Ambi and CHRdutch.
-
Hunchman801

- Posts: 87628
- Joined: Thu Aug 07, 2003 6:50 pm
- Location: Paris, France
- Contact:
- Tings: 640252
Re: SOTM #92 - Geometry/Shapes
Harpic, Ambi and PluM.
I'm curious about the math behind PluM's though.
I'm curious about the math behind PluM's though.
Re: SOTM #92 - Geometry/Shapes
I vote for CHRdutch and Ambidextroid.
Re: SOTM #92 - Geometry/Shapes
I'll vote for Harpic.
-
PluMGMK

- Posts: 40508
- Joined: Fri Jul 31, 2009 9:00 pm
- Location: https://www.youtube.com/watch?v=cErgMJSgpv0
- Contact:
- Tings: 136606
Re: SOTM #92 - Geometry/Shapes
Well according to Wikipedia if we define the integral the "normal" way, as a sum of two integrals where the lower limit of one matches the upper of the other, at some arbitrary finite value, and the other two limits tend to plus and minus infinity, then it is undefined. But we can cheat and instead have it as an integral from a to -a, and let a tend to infinity, and then it has the value you'd intuitively expect, which is the centre of the peak. This is how I solved my problem, before realizing I'd been overcomplicating it.Hunchman801 wrote:Harpic, Ambi and PluM.
I'm curious about the math behind PluM's though.
As for that thing about the Uncertainty Principle, I'm a bit rusty about why that's the case, but I believe it's related to Fourier transforms.
-
Serza5

- Posts: 48387
- Joined: Sat Jul 26, 2008 7:51 pm
- Location: MOTHER FUCKING SCOTLAND OH YEAH BABY
- Contact:
- Tings: 490135
Re: SOTM #92 - Geometry/Shapes
Serza5 wrote: 7 sigs means 3 votes maximum and no minumum.Because the votes started slightly later i'll add one day so the last day of votes will be the 28th and the results will be on the 29th.Code: Select all
Harpic fraîcheur : |||| Ambidextroid : ||||| Master : || CHRdutch : || PluMGMK : || Serza5 w/ Hoodcom : |||| Hoodcom w/ Serza5 : ||
Re: SOTM #92 - Geometry/Shapes
I vote for Harpic Fraîcheur
-
Hunchman801

- Posts: 87628
- Joined: Thu Aug 07, 2003 6:50 pm
- Location: Paris, France
- Contact:
- Tings: 640252
Re: SOTM #92 - Geometry/Shapes
Well yeah, you pretty much created an indeterminate form from one that wasn't.PluMGMK wrote:Well according to Wikipedia if we define the integral the "normal" way, as a sum of two integrals where the lower limit of one matches the upper of the other, at some arbitrary finite value, and the other two limits tend to plus and minus infinity, then it is undefined. But we can cheat and instead have it as an integral from a to -a, and let a tend to infinity, and then it has the value you'd intuitively expect, which is the centre of the peak. This is how I solved my problem, before realizing I'd been overcomplicating it.
As for that thing about the Uncertainty Principle, I'm a bit rusty about why that's the case, but I believe it's related to Fourier transforms.
I'm not too sure how this applies to the function in your signature though, because it's neither even nor odd and its integral from 0 to infinity does not converge.
-
PluMGMK

- Posts: 40508
- Joined: Fri Jul 31, 2009 9:00 pm
- Location: https://www.youtube.com/watch?v=cErgMJSgpv0
- Contact:
- Tings: 136606
Re: SOTM #92 - Geometry/Shapes
Took me a few days to realize it wasn't obvious that I had done a change of variables! I actually integrated using λ' = λ - λ0. This allowed me to split it into two, one of which was just λ0 times the area under the Lorentz curve, which is unity, and the other of which was the integral of an odd function. So actually my limits in the original variable were ±a + λ0, my bad! 
-
Hunchman801

- Posts: 87628
- Joined: Thu Aug 07, 2003 6:50 pm
- Location: Paris, France
- Contact:
- Tings: 640252
Re: SOTM #92 - Geometry/Shapes
Well you're right, I tried it and you end with λ0 plus an improper integral of an odd function. What's interesting is that the actual meaning of the improper integral is ambiguous, so we use the Cauchy principal value, which is indeed 0.PluMGMK wrote:Took me a few days to realize it wasn't obvious that I had done a change of variables! I actually integrated using λ' = λ - λ0. This allowed me to split it into two, one of which was just λ0 times the area under the Lorentz curve, which is unity, and the other of which was the integral of an odd function. So actually my limits in the original variable were ±a + λ0, my bad!
I don't think it's a case of analytic continuation (used everywhere in physics) though, just an ambiguous notation.
-
Serza5

- Posts: 48387
- Joined: Sat Jul 26, 2008 7:51 pm
- Location: MOTHER FUCKING SCOTLAND OH YEAH BABY
- Contact:
- Tings: 490135
Re: SOTM #92 - Geometry/Shapes
Serza5 wrote: 7 sigs means 3 votes maximum and no minumum.Because the votes started slightly later i'll add one day so the last day of votes will be the 28th and the results will be on the 29th.Code: Select all
Harpic fraîcheur : ||||| Ambidextroid : ||||| Master : || CHRdutch : || PluMGMK : || Serza5 w/ Hoodcom : |||| Hoodcom w/ Serza5 : ||
-
PluMGMK

- Posts: 40508
- Joined: Fri Jul 31, 2009 9:00 pm
- Location: https://www.youtube.com/watch?v=cErgMJSgpv0
- Contact:
- Tings: 136606
Re: SOTM #92 - Geometry/Shapes
Yeah. Actually this conversation inspired me to do some more research on this and apparently there are good physical reasons for this distribution not to have a mean. So just a case of my not really knowing what I was doing! The funny thing is though, I wasn't actually looking for the mean, it just fell out when I manipulated another integral that I had used to produce some information that was actually useful.Hunchman801 wrote:I don't think it's a case of analytic continuation (used everywhere in physics) though, just an ambiguous notation.
-
Hunchman801

- Posts: 87628
- Joined: Thu Aug 07, 2003 6:50 pm
- Location: Paris, France
- Contact:
- Tings: 640252
Re: SOTM #92 - Geometry/Shapes
Interesting! My knowledge of wave propagation is way too rusted to make sense of the physical interpretation (it's been a good ten years at least) but I'm sure it all makes sense. 
Re: SOTM #92 - Geometry/Shapes
Vote for Harpicques!
-
Indy

- Posts: 1134
- Joined: Wed Jan 02, 2013 7:22 pm
- Location: Echoing Caves and my work department in a corner of my house.
- Contact:
- Tings: 20526
Re: SOTM #92 - Geometry/Shapes
1 vote for Harpic!



