+ Set it up, and it's fantastic, and the mic we have is apparently also fantastic as well.
- Only problem is that there's a noticable amount of noise in the USB interface (which is shit), I was able to get around it by knocking the PC mic volume down to 5 and turning up the gain on the mixer, so not really an issue. I'll also try just directly wiring the mixer outputs to the onboard sound card, and see if that's any better.
EDIT: Wait, nvm, when I do that, there's a whine due to signal interference (not caused by the mixer, and, apparently, the noise is different when you don't set the audio resolution to 48kHz. wtf









