Is it very difficult to build a PC in order to do things like edit video or manage large files in Photoshop (without the PC freezing constantly)? Or is it better to find an expert to do that and avoid ruining your own computer?In all seriousness, I don't have much experience with Mac, but they're supposed to be better in terms of reliability, and a lot of people use them for work. The main thing a PC is better for is gaming, but it depends on what you want to use a computer for and whether you play consoles etc. I'm just so used to PC's myself, I like having the option to upgrade components, and they're much cheaper to build than buying a Mac too.
MacOS is similar to Linux in many ways, but with Apple branding. The price point of a Mac is the main thing that puts me off, knowing I can build a PC with similar specs for less than half the price.
It's not really that difficult, the main thing you'd have to be careful about while building one is the pins on the motherboard (Intel) or the pins on the CPU (AMD), as you really don't want to bend them. Most things are straight forward though, with the most confusing one usually being plugging in the cables the front I/O (power button, LED's etc.) in the correct order. There's usually a diagram on the website for the motherboard explaining where they go, and the board itself usually has them labelled.Is it very difficult to build a PC in order to do things like edit video or manage large files in Photoshop (without the PC freezing constantly)? Or is it better to find an expert to do that and avoid ruining your own computer?
I'm exceptionally bad at anything that involves dismantling a PC, I've only done that to remove a hard drive from a laptop that no longer worked. Is there a website or websites that you recommend that teach how to do this kind of things?It's not really that difficult, the main thing you'd have to be careful about while building one is the pins on the motherboard (Intel) or the pins on the CPU (AMD), as you really don't want to bend them. Most things are straight forward though, with the most confusing one usually being plugging in the cables the front I/O (power button, LED's etc.) in the correct order. There's usually a diagram on the website for the motherboard explaining where they go, and the board itself usually has them labelled.
Ok, thanks for the detailed answerI've never really used websites when assembling them, aside from looking at the actual site for the motherboard manuals (such as ASUS, MSI, Gigabyte etc.) if I needed to look up the front I/O.
It basically works in the way that you just need all the necessary components, then once you have them all, it's easier than you might think. There are videos or other sites you could look at by googling, but it would basically just be for an example of how someone builds a computer, as a few things can vary. LinusTechTips always does that kind of stuff, so surely he'd at least have one video showing people how to build a computer.
The CPU pins are really what you want to be careful with, but it's very easy to actually install the CPU. Nothing bad will happen if the CPU is slotted in from above like it's supposed to be, and there would definitely be videos for that, along with basic instructions. RAM just slots into a computer in a similar fashion to a game cartridge also, so once the motherboard is screwed into the case and you have those installed, the rest is mainly straight forward stuff and cable management.
At any rate, I haven't a clue what is meant by "ironic penguin thing", since the question of operating system is orthogonal to that of hardware (which is what "PC" and "Mac" designate).![]()
Yep, but Linux is an OS (technically just a kernel), not a type of computer.At any rate, I haven't a clue what is meant by "ironic penguin thing", since the question of operating system is orthogonal to that of hardware (which is what "PC" and "Mac" designate).![]()
The ironic penguin thing that says in the poll actually it's refering to Linux.